Food Preparation
Showing 1–16 of 49 results
-
2011 Varimixer W60PL 60 Qt. Commercial Planetary Floor Pizza Mixer w/ Accessories – 208V, 3 PH
$6,500.00$4,995.00Quick ViewGreat condition 2011 Varimixer W60PL 60 Qt. Commercial Planetary Floor Pizza Mixer w/ Accessories Planetary Mixer with Bowl and all three attachments – Whisk, Paddle and Dough hook. Works well and checked here by our technician.
You can purchase with confidence and save a small fortune by buying quality pre-owned equipment from us… Your Equipment Guys! We are based in Charlotte, NC and can ship your items anywhere in the US!! Please give us a call if you have any questions and be sure to ask about all of our other equipment since we have so much more than what you see here online. Additionally, we Buy, Sell and Trade equipment. We travel all over the country to take apart restaurants and can either purchase or auction your place for you. If you have a need in that department, we hope you think of us first!!
-
2012 30 Qt Globe SP30 Commercial Mixer – Floor Model w/ Attachments, 115 V
$3,295.00Quick ViewPaint scratches on base/legs. Good condition.
Pizza, bread, cake and cookie dough can be mixed perfectly with the Globe SP30 all-purpose commercial mixer. This unit has a powerful, custom-built, one-horsepower motor and high-torque transmission, and can mix the products at three fixed speeds. Made with a cast iron body, the unit includes a 30-quart stainless steel mixing bowl, spiral dough hook, stainless steel wire whip and flat beater. It also has front-mounted digital controls with a 60-minute timer to assure mixing consistency, and is dishwasher safe.
These floor mixers generally cost $4,900.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
-
2013 Southbend NODR14 Rinse Station w/ Faucet, 10 Gallon Capacity
$1,995.00Quick ViewHigh production of dry and cooked pasta for individual and bulk preparation where space is a premium. Southbend’s NODR14 Pasta Rinse Station w/ Faucet is just the thing for any kitchen with a high output of noodles and limited kitchen space.
These generally cost $3,869.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
THIS ITEM IS AVAILABLE FOR LOCAL PICKUP ONLYLocal Pickup items are available at Your Equipment Guys between 10AM and 5PM Mon – Fri.
Please contact us if you would like us to connect you to our shipping partner.
-
2014 Doyon BTF020 20 Quart Planetary Stand Mixer w/ Guard, 120V w/ 3 Attachments
$4,995.00Quick ViewSpeed up production in your commercial bakery or kitchen with the Doyon BTF020 20 qt. commercial mixer.
Note: Item is freestanding but could be placed on countertop or equipment stand based on size
-
2015 SSPG14 Pitco Solstice Supreme 12 Gallon Pasta Cooker, 115V, Natural Gas
$2,995.00Quick ViewThe Frialator SSPG14 Solstice Supreme Pasta Cooker from Pitco is an essential piece of equipment for any establishment that needs to produce a large amount of pasta on a regular basis.
The marine-grade tank in the Pitco SSPG14 pasta cooker can hold 12 gallons of water for cooking fettuccine, macaroni, and other popular pasta types. So it doesn’t splash out onto the floor, the tank overflow contains water, and a 11⁄4-inch drain eases emptying after use.
THIS ITEM IS AVAILABLE FOR LOCAL PICKUP ONLYLocal Pickup items are available at Your Equipment Guys between 10AM and 5PM Mon – Fri.
Please contact us if you would like us to connect you to our shipping partner.
-
2016 True TSSU-72-18 72″ Triple Door Refrigerated Sandwich Prep Table, 115 V
$2,495.00Quick ViewTrue’s salad/sandwich units are designed with enduring quality that protects your long term investment.
Note: 1/6 Pans are not included with this item.
These food prep tables generally cost up to $3,900.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
-
2016 True TSSU-72-18 72″ Triple Door Refrigerated Sandwich Prep Table, 115 V
$2,495.00Quick ViewTrue’s salad/sandwich units are designed with enduring quality that protects your long term investment.
Note: 1/6 Pans are not included with this item.
These food prep tables generally cost up to $3,900.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
-
2017 Somerset CDR-115 Dough Prepper, Bench Style, 110 V
$1,795.00Quick View- Manufacturer: Somerset
- Manufacturer Sku: CDR-115
- Weight: 90
- Width: 15.25″
- Height: 16.76
- Depth: 19.17
- Rollers: s/s frame w/synthetic rollers
- Roller size: 11″
- Bench or Floor: bench
These generally cost $2,292.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
-
2018 True TPP-44 44″ Pizza Prep Table with Refrigerated Base, 115V
$2,995.00Quick ViewNew Open Box, Scratch and Dent Model – Right side dented. Please check all the pictures carefully to determine if the quality is to your approval.
These generally cost $3,633.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
THIS ITEM IS AVAILABLE FOR LOCAL PICKUP ONLYLocal Pickup items are available at Your Equipment Guys between 10AM and 5PM Mon – Fri.
Please contact us if you would like us to connect you to our shipping partner.
-
2018 True TSSU-48-18M-B-HC 48″ Mega Top Sandwich/Salad Prep Table, 115 V
$2,890.00Quick ViewThis True TSSU-48-18M-B-HC mega-top food prep table includes a cutting board that runs the full length of the equipment’s countertop, giving staff a sanitary and convenient spot to prep ingredients and assemble dishes.
These generally cost $3,416.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
Please Note: Scratch and Dent Model – Dent on right door and dent on right and left side.
-
2018 True TWT-60-HC 60″ Worktop Refrigerator, 2 Sections, 115 V
$2,495.00Quick ViewThis True TWT-60-HC worktop refrigerator has two swing-out doors that are self-closing with the exterior constructed of stainless steel, the sides, front, and door withstand heavy use, and the back is made of corrosion-resistant.
New, Open Box Scratch and Dent Model – Dents on left and right sides, hinges were replaced on top and bottom of left and right doors, and doors were damaged at bottom and frame. Good condition overall and details above did not mess up functionality of product.
These generally cost $2,921.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
THIS ITEM IS AVAILABLE FOR LOCAL PICKUP ONLYLocal Pickup items are available at Your Equipment Guys between 10AM and 5PM Mon – Fri.
Please contact us if you would like us to connect you to our shipping partner.
-
2019 True TSSU-72-30M-B-ST-HC 72″ Sandwich/Salad Prep Table, 115 V
$3,995.00Quick ViewTo hold more pans, the True TSSU-72-30M-B-ST-HC prep table is designed with a wider, deeper countertop than standard prep tables.
New, Open Box Scratch and Dent Model – Top corners hood and lids dented/damaged and countertop scratched. Please check all the pictures carefully to determine if the quality is to your approval.
These generally cost $4,375.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
THIS ITEM IS AVAILABLE FOR LOCAL PICKUP ONLYLocal Pickup items are available at Your Equipment Guys between 10AM and 5PM Mon – Fri.
Please contact us if you would like us to connect you to our shipping partner.
-
AutoGyros 4LE Vertical Broiler, 65 lb Capacity, 240 V/ 60 Hz/ Ph 1
$995.00Quick ViewThe AUTOGYROS 4LE vertical electric broiler is great for any restaurant that serves lamb, goat, chicken, turkey, or beef. It is also good for cooking several gyros and tacos!
These generally cost $1,095.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
-
Bizerba SE12U Manual Cheese/Deli Meat Slicer Cutter, 120 V Phase 1
$1,495.00Quick ViewThe SE12 is above all used in supermarket deli departments and high-street butchers as well as in the catering industry, bakeries and restaurants. This heavy duty precision slicer is ideal for bulky and heavy meats like ham, beef olives, cheese also soft enough to cut up vegetables and bread.
You can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
THIS ITEM SHIPS FREE.
-
Blendtec ICB3/ABC3 Q Series Model Smoother 13 w/ Base, Countertop, 120 V
$695.00Quick ViewThe Blendtec® Q-Series™ Blender combines superior power with significant noise reduction. It features a clear polycarbonate sound enclosure and is perfect for use in restaurants and bars.
Select the blend profiles best suited to your needs and assign them to the keypad. Smoothies, frozen coffees, frappes and Shakes are made perfectly every time. No more hassles with the timers and buttons!
The new Q-Series sound reduction technology, gives a reduction of 10 decibels, nearly half of the audible sound associated with the normal blender operations.
These Blendtec Q Series Smoothers generally cost $843.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
-
Cleveland SEL-30-TR 30 Gallon Electric Open Base Tilt Skillet, 208 V Phase 3
$9,995.00Quick ViewNew Open Box Scratch & Dent Model – Two dents seen firsthand on left side of front and dent seen on the back side. Please check all the pictures carefully to determine if the quality is to your approval.
With the Cleveland SEL-30-TR DuraPan electric open base tilt skillet, you can cook up to 75 lb. of ground beef or make up to 27 gallons of soup at once! Meanwhile, at full capacity, the pan can go from cold to boiling in just 60 minutes.
Note: The box located on the back where the plug hangs can be removed for a straight/direct connection if needed, however, it is a safe covering and can stay as-is if the plug-in works for your needs.
No casters or leg dollies included.
These generally cost $14,110.00 new, but you can save a small fortune by buying quality pre-owned equipment from us, Your Equipment Guys! We serve the Charlotte, NC area and can ship your items anywhere in the US.
